Keep Safety a Priority When Using a Disc Sander

You may be one of many people who think they know how to use a disc sander, but perhaps, also you are one of them who do not know how to use one safely.


Never, ever underestimate the disc sander. It is a powerful tool, and though manufacturers have taken great strides to improve its safety, accidents do happen. You need to protect yourself (and others) from getting hurt when using this tool.



Here are some essential tips that you or anyone can apply when using either a hand-held or a bench-mounted disc sander.


Hand-Held Disc Sander Online

Wear well-fitting clothing, because loose sleeves or loose pants can easily get caught by the moving disc while you work.


Get a pair of safety goggles from any hardware store, as they will protect your eyes from flying sawdust and wood particles.


Before connecting the disc sander, check that it is disabled. Untangle the cable and place it away from the area you plan to sand. A cable that gets in the way is in danger of being cut by the moving disc while sanding — a power cord, when split or completely severed, can be very dangerous.


While working, use two hands to maintain proper leverage and sander control. Always unplug the power cord when you need to change the sandpaper on the disc to prevent the machine from accidentally turning on.


It only takes a few seconds to unplug the sander and then plug it back in. Doing so ensures your peace of mind and protection of your fingers and other body parts.


Bench-Mounted Disc Sanders Online

As mentioned above, wear snug clothing and safety goggles while wearing a bench-mounted disc sander.


If you are in the market for a bench-mounted disc sander, be sure to look for a model that has a key for security function. It is an accessory that must be in place for the machine to work. Once you remove it, you don’t have to worry about the kids accidentally turning on the sander. It will also mean less worrying about the machine receiving power when changing the sanding surface.


When you work with a disc sander, don’t get distracted. Conversations and phone calls can wait until you’re done. If you can’t wait, take a break, disconnect the sander from your power supply, and then return to work.


During sanding, apply only light pressure to the wood or sander. The disc sander must be the one that works, not you. The use of light pressure allows you to have greater control over the sanding process and will protect your hands and fingers from sudden movements that could result in an accident.

Purchase a fantastic disc sander online. Review this article if you need refreshing on the safety precautions you need to observe when working with it.